Honda Civic: Audio System Theft Protection - Audio System - Features - Honda Civic Owners ManualHonda Civic: Audio System Theft Protection

The audio system is disabled when it is disconnected from the power source, such as when the battery is disconnected or goes dead.

■ Reactivating the audio system

1. Turn the ignition switch to ON and turn on the audio system., and turn on the audio system.

If you turn the ignition switch to ACCESSORY enter the audio security code. See step 3., you will be requested to enter the audio security code. See step 3.

2. Press and hold the power button again for more than two seconds.

The audio system is reactivated when the system’s control unit recognizes that the system is in your vehicle.

If the control unit fails to recognize, “ENTER CODE” appears on the multiinformation display.

3. Enter the audio security code using the preset buttons. If you enter an incorrect digit, continue to the last digit, then try again. If you do not enter code correctly after 10 tries, leave the system for one hour before trying again, or visit a dealer to have the system reset.

Find the audio system's security code and serial number label in your owner’s manual kit.

We recommend that you write down the serial number in this owner’s manual.

Do not store the label in your vehicle. If you lose the label, you must first retrieve the serial number, and then obtain the code.

You can find out about your serial number and security code from a dealer.

U.S. models

You can register the security code at Owner Link (owners.honda.com.), and find information on how to retrieve the serial number and obtain the code at radio-navicode.honda.com.

    Auxiliary Input Jack
    Use the jack to connect standard audio devices. 1. Open the AUX cover. 2. Connect a standard audio device to the input jack using a 1/8 inch (3.5 mm) stereo miniplug. The audio system automat ...

    Audio System Basic Operation
    Models with information display To use the audio system function, the ignition switch must be in ACCESSORY or ON . Use the selector knob or SETUP button to access some audio functions. Pre ...

    See also:

    Air Cleaner
    Air Cleaner If the air cleaner is clogged with dust, there will be greater intake resistance, resulting in decreased power output and increased fuel consumption. Unclamp the side clamps, an ...

    To increase the speed (by accelerator pedal)
    1. Depress the accelerator pedal to accelerate the vehicle to the desired speed. 2. Push the “SET/COAST” button once. Now the desired speed is set and the vehicle will keep running at that speed ...

    Unlocking doors
    Coupe shown, Sedan similar 1. Carry the Intelligent Key. 2. Push the door handle request switch 1 . 3. The hazard warning lights flash once and the outside buzzer sounds once. 4. Push the door ...