Honda Civic: Brightness Control - Operating the Switches Around the Steering Wheel - Controls - Honda Civic Owners ManualHonda Civic: Brightness Control

When the parking lights are turned on and the

When the parking lights are turned on and the ignition switch is in ON you can use the, you can use the brightness control knob to adjust instrument panel brightness.

Brighten: Turn the knob to the right.

Dim: Turn the knob to the left.

You will hear the beeper when the brightness reaches minimum or maximum. The information display*/multi-information display* will return to its original state several seconds after you adjust the brightness.

■ Brightness level indicator

■ Brightness level indicator
The brightness level is shown on the information display*/multi-information display* while you are adjusting it.

Instrument panel brightness varies, depending on whether the exterior lights are on or off. The instrument panel dims to reduce glare when they are on.

Pressing the knob or the (SEL/RESET) knob or the (display/information) button* switches the display. (display/information) button* switches the display.

If you turn the knob to the right until the brightness display is up to max, the beeper sounds. This cancels the reduced instrument panel brightness when the parking lights are on.

The brightness can be set differently for when the exterior lights are on, and when they are off.

    Wipers and Washers
    The windshield wipers and washers can be used when the ignition switch is in ON . ■ MIST The wipers run at high speed until you release the lever. ■ Wiper switch (OFF, INT, LO, H ...

    Rear Defogger/Heated Door Mirror Button
    Press the rear defogger and heated door mirror button to defog the rear window and mirrors when the ignition switch is in ON . The rear defogger and heated door mirrors automatically switch ...

    See also:

    Important safety notes
    Consult an authorized Mercedes-Benz Center if you require information on approved and recommended tires and wheels for summer and winter operation. Advice on purchasing and caring for tires is ...

    Waxing and polishing
    Always wash and dry the vehicle before waxing and polishing. Use a good quality polish and wax and apply them according to the manufacturer’s instructions. Wax or polish when the painted surface is ...

    Last destinations
    At a glance The destinations previously entered are stored automatically. The destinations can be called up and used as a destination for destination guidance. Calling up the last destination ...