Honda Civic: Changing the Wiper Blade Rubber - Checking and Maintaining Wiper Blades - Maintenance - Honda Civic Owners ManualHonda Civic: Changing the Wiper Blade Rubber

1. Lift the driver side wiper arm first, then the

1. Lift the driver side wiper arm first, then the passenger side.

2. Place a cloth on the edge of the lock tab.

2. Place a cloth on the edge of the lock tab.

Push the lock tab up with a flat-tip screw driver.

3. Slide the blade from the wiper arm.

NOTICE
Avoid dropping the wiper arm; it may damage the windshield.

4. Slide the wiper blade out from its holder by

4. Slide the wiper blade out from its holder by pulling the tabbed end out.

5. Remove the retainers from the rubber blade

5. Remove the retainers from the rubber blade that has been removed, and mount to a new rubber blade.

Correctly align the rubber protrusion and the retainer grooves.

6. Slide the new wiper blade onto the holder

6. Slide the new wiper blade onto the holder from the bottom end.

The tab on the blade should fit in the indent of the wiper blade.

7. Slide the wiper blade onto the wiper arm, then push down the lock tab.

8. Lower the passenger side wiper arm first, then the driver side.

    Checking Wiper Blades
    If the wiper blade rubber has deteriorated, it will leave streaks and the metal wiper arm may scratch the window glass. ...

    See also:

    Overview, instrument cluster
    Overview, instrument cluster 1 Messages, e.g. Check Control     Time     Date     External temperature     Selection lists  & ...

    Following the initial pairing
    ▷ The mobile phone is detected/connected in the vehicle within a short period of time when the engine is running or the ignition is switched on. ▷ After they have been identified, p ...

    Reminders
    Displaying reminders Reminders of pending appointments and tasks are displayed. After an appointment or after a task is due, the reminder is no longer displayed. 1. "Office". 2. " ...