Honda Civic: Fog Light Bulbs - Replacing Light Bulbs - Maintenance - Honda Civic Owners ManualHonda Civic: Fog Light Bulbs

When replacing, use the following bulbs.

Fog Light: 55 W (H11)

1. Remove the screw using a Phillips-head

1. Remove the screw using a Phillips-head screwdriver and carefully pull the fog light assembly out of the bumper.

2. Remove the coupler.

2. Remove the coupler.

It can be removed by pushing the tab.

3. Rotate the old bulb to the left to remove.

4. Insert a new bulb into the fog light assembly and turn it to the right.

5. Insert the coupler into the connector of the bulb.

NOTICE
Halogen bulbs get very hot when lit. Oil, perspiration, or a scratch on the glass can cause the bulb to overheat and shatter.

The fog lights are halogen bulbs.

When replacing a bulb, handle it by its plastic case, and protect the glass from contact with your skin or hard objects. If you touch the glass, clean it with denatured alcohol and a clean cloth.

    Low Beam Headlights
    Driver side 1.8 ℓ engine models 1. Remove the holding clips (A). Push up the tab, and remove the cover of the air intake duct and its upper part. 2.4 ℓ engine models 1. Unlock ...

    Front Turn Signal/Parking/Side Marker Light Bulbs
    When replacing, use the following bulbs. Front Turn Signal/Parking/Side Marker Light: 28/8 W 1. Turn the steering wheel all the way to the opposite side from the light being replaced. Passenger ...

    See also:

    Engine oil and filter renewal
    Non-VVT-i models - every 7000 km or 6 months VVT-i models - every 8000 km or 6 months 1 Frequent oil and filter changes are the most important preventative maintenance procedures which can be un ...

    Folding the seat backrest forward
    Folding the seat backrest forward Move the driver's or front-passenger seat forward if necessary. Open the trunk. Pull right-hand or left-hand rear seat backrest release handle 1. The ...

    Inserting a disc in a desired position
    1. Briefly press the “LOAD” button. If the magazine in the player has an idle position where you can insert a disc, the disc number indicator associated with the idle position will blink. The pos ...