Honda Civic: How to Refuel - Refueling - Driving - Honda Civic Owners ManualHonda Civic: How to Refuel

1. Stop your vehicle with the service station

1. Stop your vehicle with the service station pump on the left side of the vehicle in the rear.

2. Turn off the engine.

3. Push on the fuel fill door release handle at the foot of the driver’s seat.

The fuel fill door opens.

Gasoline is highly flammable and explosive.

Gasoline is highly flammable and explosive.

You can be burned or seriously injured when handling fuel.

• Stop the engine, and keep heat, sparks, and flame away.

• Handle fuel only outdoors.

• Wipe up spills immediately.

4. Remove the fuel fill cap slowly. If you hear a

4. Remove the fuel fill cap slowly. If you hear a release of air, wait until this stops, then turn the knob slowly to open the fuel fill cap.

5. Place the fuel fill cap in the holder.

5. Place the fuel fill cap in the holder.

6. Insert the filler nozzle fully.

When the tank is full, the fuel nozzle will click off automatically. This leaves space in the fuel tank in case the fuel expands with a change in the temperature.

7. After filling, replace the fuel fill cap, tightening it until you hear it click at least once.

Shut the fuel fill door by hand.

The filler nozzle automatically stops to leave space in the fuel tank so that fuel does not overflow as a result of changes in air temperature.

If the fuel nozzle keeps turning off when the tank is not full, there may be a problem with the pump's fuel vapor recovery system. Try filling at another pump. If this does not fix the problem, consult a dealer.

Do not continue to add fuel after the nozzle has automatically stopped. Additional fuel can exceed the full tank capacity.

    Fuel Information
    ■ Fuel recommendation 1.8 ℓ engine models Unleaded gasoline, pump octane number 87 or higher Use of a lower octane gasoline can cause a persistent, heavy metallic knocking noise tha ...

    See also:

    Vehicle Dynamics Control OFF switch (except STI)
    Indicator light (turbo models) Indicator light (non-turbo models) Vehicle Dynamics Control OFF switch Pressing the switch to deactivate the Vehicle Dynamics Control system can facilitate the follow ...

    Replacing
    1. Lift the wiper arm away from the windshield. 2 Push the release tab, then move the wiper blade down the wiper arm to remove. 3 Remove the wiper blade. 4. Insert the new wiper blade onto the w ...

    Useful tips for correct operation
    You can display useful speaking tips to help the system recognize your voice commands correctly. 1. Select “Help on Speaking”. 2. You can confirm the page by scrolling the screen. ...