Subaru Impreza: If the light is blinking - CHECK ENGINE warning light/Malfunction indicator lamp - Warning and indicator lights - Instruments and controls - Subaru Impreza Owners ManualSubaru Impreza: If the light is blinking

If the light is blinking while driving, an engine misfire condition has been detected which may damage the emission control system.

To prevent serious damage to the emission control system, you should do the following.

• Reduce vehicle speed.

• Avoid hard acceleration.

• Avoid steep uphill grades.

• Reduce the amount of cargo, if possible.

The CHECK ENGINE warning light may stop blinking and illuminate steadily after several driving trips. You should have your vehicle checked by an authorized SUBARU dealer immediately.

    If the light illuminates steadily
    If the light illuminates steadily while driving or does not turn off after the engine starts, an emission control system malfunction has been detected. You should have your vehicle checked by an auth ...

    Coolant temperature low indicator light (nonturbo models)/Coolant temperature high warning light (non-turbo models)
    • After turning the ignition switch to the “ON” position, if this indicator light/warning light behaves in any of the following ways, the electrical system may be malfunctioning. Contact y ...

    See also:

    Locking/Unlocking the Doors from the Inside
    ■Using the Lock Tab ■ Locking a door Push the lock tab forward. ■ Unlocking a door Pull the lock tab rearward. Models with remote transmitter When you lock the door using the ...

    California Fuel
    If the vehicle is certified to meet California Emissions Standards, it is designed to operate on fuels that meet California specifications. See the underhood emission control label. If this fuel is ...

    Useful information
    This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differenc ...