Honda Civic: Light Switches - Operating the Switches Around the Steering Wheel - Controls - Honda Civic Owners ManualHonda Civic: Light Switches

■Manual Operation

Rotating the light switch turns the lights on

Rotating the light switch turns the lights on and off, regardless of the position of the ignition switch.

■ High beams
Push the lever forward until you hear a click.
■ Low beams
When in high beams, pull the lever back to return to low beams.
■ Flashing the high beams
Pull the lever back, and release it.

If you remove the key from the ignition switch while the lights are on, a chime sounds when the driver’s door is opened.

When the lights are on, the lights on indicator in the instrument panel will be on.

Do not leave the lights on when the engine is off because it will cause the battery to discharge.

    Turn Signals
    The turn signals can be used when the ignition switch is in ON . ...

    Automatic Lighting Control
    Automatic lighting control can be used when the ignition switch is in ON . When you turn the light switch to , the headlights and other exterior lights will switch on and off automatically ...

    See also:

    Forward-facing child restraint installation using the seat belts
    WARNING The three-point seat belt with Automatic Locking Retractor (ALR) must be used when installing a child restraint. Failure to use the ALR mode will result in the child restraint not being p ...

    Adjusting the steering wheel
    WARNING: Never adjust the steering wheel when the vehicle is moving. Note: Make sure that you are sitting in the correct position. See Sitting in the correct position. WARNING: Make sur ...

    Select lever
    : Shifting is possible with the brake pedal depressed. : Shifting is possible whether the brake pedal is depressed or not. However, while the ignition switch is in the “LOCK” or “Acc” ...