Honda Civic: Rear License Plate Light Bulb - Replacing Light Bulbs - Maintenance - Honda Civic Owners ManualHonda Civic: Rear License Plate Light Bulb

When replacing, use the following bulb.

Rear License Plate Light: 5 W

Models with trunk lid lining

1. Remove the screw from the center of the

1. Remove the screw from the center of the fastener using a Phillips-head screwdriver.

2. Remove the holding clips using a flat-tip screwdriver, then pull the lining back.

All models

3. Remove the license plate light assembly by

3. Remove the license plate light assembly by squeezing the tabs on both sides of the socket.

4. Remove the old bulb and insert a new bulb.

    Brake Light, Taillight, Back-Up Light, Rear Turn Signal Light and Rear Side Marker Light Bulbs
    When replacing, use the following bulbs. Brake/Taillight: 21/5 W Back-Up Light: 21 W Rear Turn Signal Light: 21 W (Amber) Rear Side Marker Light: 3 CP 1. Remove the holding clips using a flat-t ...

    High-Mount Brake Light Bulb
    1.8 ℓ engine models When replacing, use the following bulb. High-Mount Brake Light: 21 W 1. Open the trunk. 2. Turn the socket to the left and remove it. 3. Remove the old bulb and insert ...

    See also:

    Content Theft-Deterrent
    Your vehicle may have a content theft-deterrent alarm system. Arming the System With the ignition off, you can arm the system by pressing the remote keyless entry transmitter lock button. The ...

    Shifting
    To change gears or when upshifting or downshifting, depress the clutch pedal fully, shift into the appropriate gear, then release the clutch slowly and smoothly. To ensure smooth gear changes, f ...

    Using the select lever
    Shift to the next-higher gear by briefly pushing the select lever toward the “+” end of the manual gate. Shift to the next-lower gear by briefly pulling the select lever toward the “− ...