Honda Civic: Resetting the Display - Maintenance Minder™ - Maintenance - Honda Civic Owners ManualHonda Civic: Resetting the Display

Reset the engine oil life display if you have performed the maintenance service.

1. Turn the ignition switch to ON .

1. Turn the ignition switch to ON 2. Go to the Maintenance info screen..

2. Go to the Maintenance info screen.

2 Displaying the Engine Oil Life and Maintenance Items P. 247 3. Press the SOURCE button.

The oil life reset mode is displayed on the multi-information display.

4. Select Yes with the press the SOURCE button. button, then press the SOURCE button.

The displayed maintenance items disappear, and the engine oil life display returns to 100%.

Any maintenance items that are necessary for your vehicle at the next maintenance service will appear.

To cancel the oil life reset mode, select No, then press the SOURCE button.

NOTICE
Failure to reset the engine oil life after a maintenance service results in the system showing incorrect maintenance intervals, which can lead to serious mechanical problems.

The dealer will reset the engine oil life display after completing the required maintenance service. If someone other than a dealer performs maintenance service, reset the engine oil life display yourself.

    Maintenance Service Items
    • Independent of the Maintenance Minder information, replace the brake fluid every 3 years. • Inspect idle speed every 160,000 miles • Adjust the valves during services A, B, 1, 2, or 3 i ...

    See also:

    Fast-forwarding
    Type A and B audio Type C audio Press the “” side of the “SEEK” button continuously to fast-forward the disc/ folder. Release the button to stop fast-forwarding. NOTE If you fast-forwar ...

    Issued warning
    If you leave the lane and if a lane marking has been detected, the steering wheel begins vibrating. If the turn signal is set before changing the lane, a warning is not issued. End of warning T ...

    Socket in the rear-compartment center console
    Socket in the rear-compartment center console Pull cover 2 out by its top edge. Lift up the cover of socket 1. ...