Honda Civic: Seat Heaters - Interior Lights/Interior Convenience Items - Controls - Honda Civic Owners ManualHonda Civic: Seat Heaters

The ignition switch must be in ON

The ignition switch must be in ON to use to use the seat heaters. The HI setting heats the seats faster than the LO setting.

There is no heater in the passenger's seatback due to the side airbag cutoff system.

While in HI, the heater cycles on and off.

While in HI, the heater cycles on and off.

The appropriate indicator will be on while the seat heater is on. Briefly press the switch on the opposite side to turn the heater off. The indicator will be off.

When a comfortable temperature is reached, select LO to keep the seat warm.

Heat induced burns are possible when

Heat induced burns are possible when using seat heaters.

Persons with a diminished ability to sense temperature (e.g., persons with diabetes, lower-limb nerve damage, or paralysis) or with sensitive skin should not use seat heaters.

Do not use the seat heaters even in LO when the engine is off. Under such conditions, the battery may be weakened, making the engine difficult to start.

In the LO setting, the heater runs continuously and does not automatically turn off.

    Coat Hook
    There is a coat hook on the rear left grab handle. Pull it down to use it. The coat hook is not designed for large or heavy items. ...

    See also:

    Power Outlets
    Accessory power outlets can be used to connect electrical equipment, such as a cellular phone. The accessory power outlet is located in the center console, rearward of the shift lever. To use the ...

    Using the system
    Initialization When the ignition switch is placed in the ON position, NISSAN Voice Recognition is initialized, which takes a few seconds. When completed, the system is ready to accept voice comman ...

    Manual transmission
    All vehicles CAUTIONS: Do not engage reverse gear when the vehicle is moving. This can cause damage to the transmission. Do not apply any undue lateral force to the gear lever when changing ...