Honda Civic: To Use Maintenance MinderTM - Models with multi-information display - Maintenance Minder™ - Maintenance - Honda Civic Owners ManualHonda Civic: To Use Maintenance MinderTM - Models with multi-information display

■Displaying the Engine Oil Life and Maintenance Items

Maintenance items, which should be serviced at the same time that you replace the engine oil, appear on the multi-information display.

You can view them on the Maintenance info screen at any time.

1. Turn the ignition switch to ON 2. Press the MENU button to go to the Vehicle Menu screen..

2. Press the MENU button to go to the Vehicle Menu screen.

3. Select Vehicle Information with the button. button, then press the SOURCE button.

4. Press the SOURCE button again to go to the Maintenance info screen. The engine oil life appears on the multi-information display.

Based on the engine operating conditions, the

Based on the engine operating conditions, the remaining engine oil life is calculated and displayed as a percentage.

There is a list of maintenance main and sub items you

There is a list of maintenance main and sub items you can view on the multi-information display.

    Resetting the Display
    Reset the engine oil life display if you have performed the maintenance service. 1. Turn the ignition switch to ON . 2. Display the engine oil life by repeatedly pressing the (SEL/RESET) knob ...

    Maintenance Minder Messages on the Multi-Information Display
    Maintenance Message Oil Life Display Explanation Information 15 % The remaining engine oil life is 15 to 6 percent. Once you switch the display by pressing ...

    See also:

    Luggage covers
    WARNING: Do not place objects on the luggage cover. 3-door and 5-door Estate Pull out the cover and secure it in the retaining points. Release it from the retaining points and let ...

    Voice command system
    Voice command system 1) OFF hook switch 2) ON hook switch 3) Talk switch To turn on the voice command system, press the talk switch briefly. To turn off the voice command system, wait for 5 sec ...

    Headlight beam select
    1 To select the high beam function, push the lever forward. The high beam lights come on and the light illuminates. 2 Pull the lever back to select the low beam. 3 Pulling and releasing the lev ...