Honda Civic: Traction - Checking and Maintaining Tires - Maintenance - Honda Civic Owners ManualHonda Civic: Traction

The traction grades, from highest to lowest, are AA, A, B, and C. Those grades represent the tire's ability to stop on wet pavement as measured under controlled conditions on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance.

Warning: The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics.

    Treadwear
    The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would ...

    Temperature
    The temperature grades are A (the highest), B, and C, representing the tire resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a sp ...

    See also:

    Clutch fluid (if so equipped)
    Check the clutch fluid level in the reservoir (manual transmissions only). Add Genuine NISSAN Super Heavy Duty Brake Fluid or equivalent DOT 3 fluid up to the MAX line A . If fluid must be a ...

    “Recent Calls”
    Use the Recent Calls command to access outgoing, incoming or missed calls. “Outgoing” A Use the Outgoing command to list the outgoing calls made from the vehicle. “Incoming” B Use the ...

    Taking a phone call and declining an incoming call
    To take a phone call: Press the OFF hook switch . To put an incoming call on hold: Press the ON hook switch briefly. To decline an incoming call: Press the ON hook switch for more than 1.5 seconds ...