Honda Civic: Wear Indicators - Checking and Maintaining Tires - Maintenance - Honda Civic Owners ManualHonda Civic: Wear Indicators

The groove where the wear indicator is

The groove where the wear indicator is located is 1/16 inch (1.6 mm) shallower than elsewhere on the tire. If the tread has worn so that the indicator is exposed, replace the tire.

Worn out tires have poor traction on wet roads.

2.4 ℓ engine models

High speed driving

We recommend that you do not drive faster than the posted speed limits and conditions allow. If you drive at sustained high speeds (over 118 mph or 190 km/h), adjust the cold tire pressures as shown below to avoid excessive heat build up and sudden tire failure.

Tire Service Life

    Temperature
    The temperature grades are A (the highest), B, and C, representing the tire resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a sp ...

    Tire Service Life
    The life of your tires is dependent on many factors, including driving habits, road conditions, vehicle loading, inflation pressure, maintenance history, speed, and environmental conditions (eve ...

    See also:

    Windshield-washer fluid
    Fill the windshield-washer fluid reservoir periodically. Add windshield-washer fluid when the low windshield-washer fluid warning light comes on. To fill the windshield-washer fluid reservoir, li ...

    Controls
    Controls 1. Fan control dial 2. Air recirculation button 3. Temperature control dial 4. Air conditioner button 5. Air flow control dial 6. Rear window defroster ...

    Starting destination guidance
    1. "Navigation". 2. Make a destination entry. 3. "Accept destination". 4. "Start guidance". ▷ The route is shown on the Control Display. ▷ The distance t ...