Honda Civic: What to Do After the Engine Starts - Jump Starting - Handling the Unexpected - Honda Civic Owners ManualHonda Civic: What to Do After the Engine Starts

Once your vehicle's engine has started, remove the jumper cables in the following order.

1. Disconnect the jumper cable from your vehicle's ground.

2. Disconnect the other end of the jumper cable from the assisting vehicle's battery - terminal.

3. Disconnect the jumper cable from your vehicle's battery + terminal.

4. Disconnect the other end of the jumper cable from the assisting vehicle's battery + terminal.

Have your vehicle inspected by a nearby service station or a dealer.

    Jump Starting Procedure
    Turn off the power to electric devices, such as audio and lights. Turn off the engine, then open the hood. 1. Connect the first jumper cable to your vehicle's battery + terminal. 2. Connect ...

    Shift Lever Does Not Move
    Automatic transmission models Follow the procedure below if you cannot move the shift lever out of the position. ...

    See also:

    Stored stations
    General information It is possible to store up to 40 stations. Calling up a station 1. "Radio". 2. "Presets". 3. Select the desired station. Storing a station The station cu ...

    Tyre tread wear patterns
    Shoulder Wear Underinflation (wear on both sides). Under-inflation will cause overheating of the tyre, because the tyre will flex too much, and the tread will not sit correctly on the road s ...

    Engine heater
    CAUTION: Make sure you disconnect the power cable from the engine heater connector before driving away. Note: The engine heater connector is located in the radiator grille at the front of your ...